| Part # |
Description |
Price |
Order |
|
IRS141
|
Motor Heat Sink -
Designed to work using the original motor adjustment clamp, this large
heat sink will really draw the heat away from the power plant. Efficient
and good looking too! |
$30.00 |
|
|
IRS142
|
Battery Heat Sink Strap -
This battery strap will do more than hold your batteries in your car. It
will also dissipate heat from your batteries. Made of lightweight
aluminum, this is a better method of holding in your batteries. |
$28.00 |
|
IRS143
|
Drive Cups - These blue
light weight aluminum drive cups replace the plastic stock drive cups. |
$17.50 |
|
IRS144
|
Spur Gear Adaptor - This
blue light weight aluminum spur gear adaptor replaces the plastic stock
spur adaptor. |
$20.00 |
|
IRS145
|
Input Shafts - These light
weight aluminum input shafts replace the stock steel input shafts. These
shafts drastically reduce rotating mass in the drive train. Also fits
TC4 - 2 pcs. |
$17.00 |
|
IRS146
|
Aluminum Main Shaft - Light
weight blue aluminum main shaft replaces the stock composite shaft. |
$22.50 |
|
IRS147
|
Pin Cushions - These pin
cushions solve the biggest problem with the TC3 Outdrives - excessive
wear! Simple and easy to install, you can save the wear on your outdrive
slots while taking advantage of the lighter aluminum outdrives. Will
also increase the outdrive life of your Associated B3 and T3 |
$ 4.00 |
|
IRS148
|
TC3 Servo/Transponder Mount
- This blue anodized one piece machined aluminum mount holds your servo
& transponder in style. |
$27.50 |
|
IRS149
|
Composite Dog Bones (4) with Pin
Cushion Installed - If you don't want to remove your old pins and
replace with our pin cushions (P/N IRS147) buy the complete unit - ready
to assemble. You'll love the way they increase the life of your
outdrives. Comes in a set of 4 - ready in install in your TC3 |
$15.00 |
|
IRS150
|
TC3 Graphite Chassis Conversion
Kit - This TC3 graphite conversion kit comes with a machined
aluminum motor mount that prevents the chassis from tweaking when you
tighten the motor clamp and machined aluminum standoffs. All are
anodized blue. The center brace is added for strength and more chassis
tunability. This kit also helps your motor and batteries run cooler and
is lighter than the stock chassis. |
$179.95 |
|
IRS151
|
Complete TC3 Graphite Chassis
Kit - includes the following parts: 2-IRS140, 1-IRS141, 1-IRS142,
1-IRS143, 1-IRS144, 1-IRS145, 1-IRS146, 1-IRS148, 1-IRS149, 1-IRS150. A
savings of over $100.00 verses buying the parts separately. |
$329.95 |
|
| IRS152 |
Replacement Graphite Chassis &
Brace for IRS150 |
$109.95 |
|
| IRS153 |
Replacement Motor Mount &
Bearing Cap for IRS150 |
$ 54.95 |
|
| IRS154 |
Replacement Stand-Off Set for
IRS150 |
$ 39.95 |
|
IRS155
|
TC3 Graphite Chassis Stiffening
Kit - This set of Graphite Chassis Stiffening Braces will increase
the stiffness of your TC3 chassis. It will also increase the
adjustability of your IRS graphite chassis. Kit includes 2 front, 2
rear, and 2 side braces with hardware. |
$ 47.99 |
|
| IRS156 |
TC3 Replacement Side Braces for
IRS155 - Includes 2 side graphite braces for IRS155 with hardware |
$ 17.99 |
|
| IRS157 |
TC3 Replacement Front Braces for
IRS155 - Includes 2 front graphite braces for IRS155 with hardware |
$ 19.95 |
|
| IRS158 |
TC3 Replacement Rear Braces for
IRS155 - Includes 2 rear graphite braces with hardware |
$ 19.95 |
|
IRS159G
|
Front One Way
Differential Ring Gear - with 4 screws. (replacement gear for
IRS159) |
$ 6.00 |
|
IRS209
|
Low profile 8/32" Blue Aluminum
Lock Nuts - 8/32" lightweight blue aluminum low profile locking
nuts. (4) Four per package |
$ 3.95 |
|
IRS425
|
Big "DAWG" Bones -
Engineered thicker to last longer, these 7075-T6 aluminum dog bones are
anodized blue and have our pin cushions (IRS147) installed. Recommended
for electric cars only. - 2 pcs. |
$ 27.95 |
|
| IRS530 |
D-Ring Style Diff Rings
- Packaged in a bulk pack of 10. Our TC3 lite
outdrives (P/N IRS140) have been modified to accept these new rings. |
$ 9.00 |
|
IRS2140
|
TC3/TC4 Lite Drives
- These out drives are improved with a bigger flange
that better supports the ring gear. It builds simular to the stock
composite outdrives. Includes (1) long & (1) short aluminum outdrive,
2-56 X 5/32 aluminum lock nuts, with pin cushions and a nut retaining
tool. The nut retaining tool makes the assembly easier. |
$ 43.99 |
|
| IRS5001 |
2-56 X 5/32 Aluminum Lock Nuts
- 20 pcs. |
$ 9.99 |
|
